EtherCAT Remote IO RT131-1BL00-EA
PLC & I/O Products > iModule Fieldbus I/O > EtherCAT I/O Module

EtherCAT Remote IO RT131-1BL00-EA

Availability: In Stock
$387.00

EtherNet EA Remote Input DI*32

SOFTLINK Remote I/O series products, based on EtherCAT, as a slave in EtherCAT network, can realize the real-time data exchange between EtherCAT master and distributed I/Os, saving cables and time of installation and debugging. With transmission speed of up to 100 Mbit/s, the series of products are suitable for applications where demand high speed response of field signals. Its compact design and convenient terminals, coupled with its protection of overvoltage and overcurrent, EtherCAT remote I/O series save your time and cost of installation and debugging and user provide with flexible and reliable experience.

In order to meet the needs of machine manufacturers and users, distributed automation architecture is used more and more in a variety of occasions, and implementation and functionality comparable to a centralized system. RT13X series IO is a completely new modular input and output device sit made possible through the bus utilization master to manage the design of automation equipment for distribution in the scene of the switch input and output signals and analog input and output signals, connected to the control system through the rich industrial fieldbus the use of IO communication network IO distribution to multiple locations away from the processor, try closer to the sensors and actuators used in distributed control systems flexible and plays a prominent role.

In the design of modern automation system, the application of industrial fieldbus impact automation. Why is traditional centralized control structure gradually replaced by distributed intelligent devices? Because it is cost-saving and system –optimizing.

Remote I/O: Design of 2 layers of terminal makes it easier to connect Optimized wiring design in the module makes cabling easier In automation equipment away from the master controller, long distance cable can result in the attenuation and interference of control signal. Such problem can be avoided in the distributed I/O system. System processor located in master control room I/Os distributed in each control position RT13x series I/O exchange data with master controller via industrial field bus.

Part Number 131-1BL00-EA
Type Digital Input Module
Number of Input 32
Input Filter 0.5ms
Nominal Input Voltage 24VDC (-15%/+20%)
"1" Signal Voltage 15~30VDC, 7mA
"0" Signal Voltage 0~5VDC
Port Protect Impact over voltage protection
Number of Output 0
Output Type -
Nominal Output Voltage -
"1" Signal Voltage -
"0" Signal Voltage -
Max. Output Current (per Ch.) -
Short Circuit Current (per Ch.) -
Max. Output Current (Total.) -
On-Resistance -
Port Protect -
Supply Voltage 24VDC (-15%/+20%)
Electrical Isolation (Bus/Field protential) AC 500V
Protocol EtherCAT
Bus Connector 2 x RJ45
Transmission rate 100Mbps
Address Config Automatic scanning
Installation DIN rail (TS35)
LED Indicate PWR:Green;ERR:Red;RUN:Green;Digital I/O:Green
Connector 2 x RJ45
Storage Temperature -25~+85°C
Humidity ≤85%RH
Approvals CE
Size (W/H/D,mm) 155x105x55
Protect. class IP20